AB V2 is a precisely and professionally made drop-in active braking system designed for Airsoft Electric Guns.
Active breaking solves problems with multiple shots in semi-mode in airsoft replicas with a very high rate of fire.
This system increases the AEG's rate of fire and limits unnecessary battery usage.
In automatic-fire mode, the piston stops in a random position due to the gearbox design.
For proper operation, it is necessary to have a functional gearbox cut-off lever, selector plate, reverse latch, trigger, and trigger block, as it has the standard gearbox.
Device features:
Pre-soldered wires allow for faster and easier installation into the replica. Wires are provided with the additional length for user adaptation.
High-quality AWG16 1,5mm and signal blue wire AWG22 0.34qmm with protective coating insulation sleeve.
Mainboard covered with conformal coating for water resistance.
Designed for springs up to M160 (equivalent for current 75A single-shot fire or 25A burst fire for max. 30s).
Ideal for popular batteries up to 17V (Ni-xx 8.4 - 12V, Li-Po 7.4 - 14.8V).
No current consumption in the idle mode and no sparking on the switch contacts.
PicoAAB is the smallest, 3rd generation mosfet with Active Brake. It can work with 14.8V Li-Poly batteries. The mosfet can be installed in every AEG. It can work with the strongest AEG replicas.
The installation is very easy and the interference in the replica is limited only to running one or two additional wires from the contacts.
PicoSSR 3 is the world's smallest MOSFET for AEG. Even though its dimensions are merely 4x6x21 mm, PicoSSR 3 is very powerful. It has great electrical and mechanical parameters and fits replicas with little space for MOSFET.
Additionally, it is fully resistant to water immersion (after heatshrink tube fitting). It can work with the strongest AEG replicas - maximum battery rated voltage is 12.8V.